- ball
- Gate valve
- butterfly valve
- Regulating valve
- Cut-off valve
- Globe valve
- Check valve
- Knife Gate Valve
- Safety valve
- Pressure relief valve
- Drain valve
- Plug valve
- Diaphragm valve
- Discharge valve
- Exhaust valve
- Filter
- Solenoid valve
- Needle valve
- Plunger valve
- Copper valve
- Compensator
- Hydraulic control valve
- Electric two way valve
- Vacuum valve
- Thermal insulation valve
- Flame arrester
- Breathing valve
- Balance valve
- Sludge discharge valve
- Ammonia valve
- Metallurgical valves
- Fluorine valve
- Low temperature valve
- Power station valve
- Natural gas valves
- Other valves
- Inlet valve
- Import actuator
ZZWPE self operated electric control temperature control valve
- sell：021-32051999
- sell：021-32050777
- fax：021-66099555
Details
- Product Introduction
- Service Promise
- Ordering Process
ZZWPE self-operated electronic temperature control valve (suitable for large caliber and heat conducting oil control), the greatest feature of the valve is the use of ordinary 220V power supply, the use of the energy of the regulated medium itself, directly to steam, hot water, hot oil and gas and other media temperature automatic regulation and control, can also be used to prevent overheating or heat exchange occasions. The valve has the advantages of simple structure, convenient operation, wide range of temperature regulation, fast response time, reliable sealing performance, and can be adjusted at will during operation, so it is widely used in hot water supply of chemical, petroleum, food, textile, Hotel and hotel departments.
Structural principle of self controlled electrically controlled temperature control valve
The control valve is composed of main valve, intelligent actuator and sensor. According to the needs of users, it has two kinds of structure: heating type and cooling type.
1. the structure and principle of the heating control valve are shown in the following illustration:
Before working, the main spool is in half open position, and the sensor is in a natural state. Connect the power supply, the main spool is fully open. The medium flows into the main valve body from the arrow direction, and the heat storage box is heated by the valve core. When the temperature rises to the corresponding set value, the sensor generates the corresponding linear signal input integrated intelligent actuator, and then drives the stem and spool to produce displacement, closes the main spool and stops heating. When the temperature is lower than the set value, the sensor generates a linear signal input actuator, driving the valve core gradually open, so that the medium according to the parabolic characteristics into the heat storage tank, heating until the set value. In this way, the controlled medium is always controlled within the set temperature range so as to achieve the purpose of temperature control.
節(jié)閥1.jpg)
(1) intelligent actuators
(2) main valve body
(3) sensor
(4) capillary
(5) manual mechanism
Remarks: heating type and cooling type. As long as the spool structure is replaced, the valve can be realized.
Main technical parameters of self operated electrically controlled temperature control valve
Nominal path (mm) | 15 | 20 | 25 | 32 | 40 | 50 | 65 | 80 | 100 | 125 | 150 | 200 | |
Nominal pressure PN(MPa) | 1.6 4.0 | ||||||||||||
Flow capacity (m 3 /h) | 5 | 7 | 10 | 16 | 25 | 40 | 63 | 100 | 160 | 250 | 400 | 630 | |
Rated travel (mm) | 6 | 8 | 10 | 14 | 20 | 30 | 30 | 40 | |||||
Temperature adjustment range ( ℃ ) | 0~120 ： 100~250 | ||||||||||||
Adjustment precision ( ℃ ) | ± 1 ~ ± 5 | ||||||||||||
Use medium | Steam, water, oil and gas | ||||||||||||
Allow
Leakage | Hard seal | 10-4 X valve rated capacity | |||||||||||
Soft seal | “ 0 ” | ||||||||||||
Capillary length | 3m 、 5m 、 10m | ||||||||||||
Depth of warm package | 270 、 430 、 630 | ||||||||||||
connection thread | 3/4 ” 1 ” | ||||||||||||
Nominal path DN （ mm ） | 20 | 25 | 32 | 40 | 50 | 65 | 80 | 100 | 125 | 150 | 200 | |
Electric actuator type | Common type | ZAZ-60 DKZ-310 | ZAZ-60 DKZ-310 | DKZ-410 | DKZ-410 DKZ-510 | |||||||
Electronic type | JHZAZ1 | JHZAZ2 | JHZAZ3 | JHZAZ3 | ||||||||
Electric actuator thrust（ N ） | Common type | 400 4000 | 400 4000 | 6400 | 6400 16000 | |||||||
Electronic type | 2000 | 4000 | 6000 | 8000 | ||||||||
Full travel
Time （ S ） | Common type | 12.5 | 20 | 32 | 48 | |||||||
Electronic type | 30 | 30 | 48 | 60 | ||||||||
Power consumption（ W ） | Common type | 28 | 35 | |||||||||
Electronic type | 6 | 15 | 25 | 40 | ||||||||
* the data in the table is only a conventional configuration, and the selection is based on the main parameters and user requirements.
Main dimensions of self controlled electrically controlled temperature control valves
節(jié)閥2.jpg)
Nominal path DN | 20 | 25 | 32 | 40 | 50 | 65 | 80 | 100 | 125 | 150 | 200 | |
A | 460 | 530 | 630 | |||||||||
B | 230 | 230 | 260 | |||||||||
H 1 | 490 | 540 | 625 | |||||||||
L | 150 | 160 | 180 | 200 | 230 | 290 | 310 | 350 | 400 | 480 | 600 | |
H 2 | 175 | 180 | 215 | 218 | 230 | 280 | 285 | 315 | 400 | 460 | 540 | |
H 3 | 53 | 57.5 | 70 | 75 | 82.5 | 92.5 | 100 | 110 | 125 | 142.5 | 170 | |
weight (Kg) | PN 16 40 | 50 | 52 | 54 | 56 | 58 | 75 | 87 | 95 | 132 | 135 | 155 |
PN64 | 53 | 56 | 58 | 65 | 68 | 84 | 110 | 129 | 177 | 180 | 210 | |
節(jié)閥3.jpg)
Nominal path DN | 20 | 25 | 32 | 40 | 50 | 65 | 80 | 100 | 125 | 150 | 200 | |
d | φ 155 | φ 162 | φ 170 | |||||||||
H 4 | 290 | 325 | 380 | |||||||||
L | 150 | 160 | 180 | 200 | 230 | 290 | 310 | 350 | 400 | 480 | 600 | |
H 5 | 175 | 180 | 215 | 218 | 230 | 280 | 285 | 315 | 400 | 460 | 540 | |
H 6 | 53 | 58 | 70 | 75 | 82 | 92 | 100 | 110 | 125 | 142 | 170 | |
weight (Kg) | PN 16 40 | 10 | 12 | 15 | 17 | 18 | 34 | 46 | 54 | 76 | 79 | 100 |
PN64 | 13 | 16 | 19 | 26 | 27 | 43 | 69 | 85 | 120 | 125 | 150 | |
The best quality, first-class service Qigao creates more value for you!
"Qigao Valve" expects to continuously improve service quality and strive for excellence. "Sincere service" is the eternal theme of "Qigao". "Qigao" strictly followsIS09001-2000 Quality system certification requirements, strict quality control, responsibility to people, to ensure the healthy operation of production, sales and service. Strengthen communication with users and provide quality products to our customers with perfection and perfect service. Hereby our factory makes the following commitments:
Product Standards：
Products in strict accordance with ChinaGB、HG Standard and USAPISuch as standard design, manufacturing, acceptance. The hardness of the sealing surface meets the requirements of the state and the width exceeds the national standard.
pre-sale service：
Product introduction, technical exchange, non-standard product design, troubleshooting。
Sale service：
A trustworthy contract guarantees timely delivery and keeps in touch with customers. For special or duplicate products, our factory arranges technicians to use and troubleshoot the products for users.
After sales service：
1、"Qigao" brand product quality period is from the factory12In the month, the implementation of the "three guarantees" service (return, replacement, warranty).
2、During the use of our products, our factory regularly organizes technical and quality inspection personnel to visit and consult users for feedback on product quality, usage status and improvement opinions, so as to further improve product quality.
3、Respond quickly to the quality of user complaints, after-sales service personnel rushed to the scene in 24-36 hours (48 hours outside the province).
4、For after-sales service, users are required to fill out the quality feedback information form after the service and make an appraisal opinion in order to improve the service quality of Qigao.
1、If the customer has special requirements for the product, the following instructions must be provided in the order contract.：
a、Structure length；
b、Connection Type；
c、Nominal diameter, full diameter, reduced diameter, pipe size;
d、Operating medium and temperature, pressure range；
e、Tests, inspection standards and other requirements
2、The factory can configure various types of driving devices according to customer's specific requirements.。
3、If the type and model of the valve are determined by the customer, the customer shall correctly state the meaning and requirements of the model and sign the contract under the condition that the supplier and the buyer understand each other.
4、For futures and order customers, please call us in advance to tell the required valve model, specification, quantity, delivery time and location, and timely transfer to the factory account according to the total 30% deposit or full payment. The rest of the payment is pending. Import before shipment to arrange delivery in time.
Order Process：
1、Customer purchase list fax to021-33872143，Or call us 021-33872141
2、Receive customer purchase list, provide valve model selection and quotation (price list)。
3、Specific agreement: delivery date, special requirements, etc.。
download Google：
1、If the customer has special requirements for the product, the following instructions must be provided in the order contract.：
|
|||||
|
|||||
2、The factory can configure various types of driving devices according to customer's specific requirements.。
|
|||||
3、If the type and model of the valve are determined by the customer, the customer shall correctly state the meaning and requirements of the model and sign the contract under the condition that the supplier and the buyer understand each other.
|
|||||
4、For futures and order customers, please call us first to tell the required valve model, specifications, quantity, delivery time and location, and press the total30%The deposit or full payment will be remitted to our factory account in time.， The rest of the payment will be remitted before shipment to arrange delivery in time.。
|
Sale service：
Trustworthy contract, guarantee timely delivery, keep in touch with customers at any time。
For special or duplicate products, our factory arranges technicians to use and troubleshoot the products for users.
After sales service：
1、"Qigao" product quality period is from the factory12Month, practice“Three packs”Service (return, replacement, warranty)。
2、During the use of our products, our factory regularly organizes technical and quality inspection personnel to visit and consult users for feedback on product quality, usage status and improvement opinions.，
In order to further improve product quality。
3、Respond quickly to the quality of user complaints, after-sales service personnel24-36Hours (outside the province48Hour) rushed to the scene。
4、For after-sales service, the user is required to fill out the quality feedback information form after the service and make an appraisal opinion in order to improve the service quality of “Qigao”.。
statement |
|